Plaster finishing machine with water injection
PFM W
Item no. 40000
Applications
- Machining plaster, lime-cement render and clay plaster
- Abrading render and plaster
- Gypsum multi finish
- Machining of fine finish plaster
- Smoothing concrete elements
- Sponging filler compounds
Advantages
- With water injection
- Light weight
- Uniform structure due to large operation area
- Time- and cost-saving (approx. 50 % time saving compared to manual work)
- Continuous speed control (optimal adjustment to each application)
Specifications
By using the plaster finishing machine with water injection PFM W you can permanently regulate the moisture of the plaster you want to process. First, connect a standard water hose to the Gardena®-Tap Connector. Then, by means of a lever valve attached to the handle and an adjustable spray nozzle at the head, the plaster can be re-moistened at your convenience to create ideal working conditions.
The continuous speed control (75-340 min-1) allows for flexible adjustment to each application, depending on the conditions and requirements. The motor is worn either on a belt or a shoulder strap. This protects the motor from soiling and reduces the weight of the hand tool to a minimum.
Save precious time and energy by using the PFM W.
This exceptional machine is naturally mainly used for plaster finishing, but there are numerous additional possible applications. You can find more information about this in the accessories section.
The PFM W was formerly knows as ROKAMAT WET.
Fields of application
- Plaster finishing ♦ ♦ ♦
- Flattening fresh concrete ♦ ♦
- Working on scaffolding ♦ ♦ ♦
suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Technical data
| Power consumption | 1 000 W |
| Idle engine speed | 75-340 rpm |
| Net weight hand tool | 2,0 kg |
| Total weight1) | 5,8 kg |
| Accessory-Ø | 250/350 mm |
Scope of supply
| Plaster finishing machine (water injection) |
| Strap |
| Supporting plate (velcro system) |
| Sponge disc Ø 350 mm (Item no. 49300) |
| Case |
Ø 350 mm Supporting plate with Velcro
Velcro System for Ø 350 mm
| Description | No. |
|---|---|
| Supporting Plate with Velcro | 48000 |
Ø 350 mm Rubbing plates
| Description | No. |
|---|---|
| Rubbing plate with Velcro perforated | 48100 |
| Rubbing plate with Velcro smooth | 48200 |
- For smoothing mortar.
- Smooth plate also for Fine Finish Plaster.
Ø 350 mm Sponge discs
| Description | No. |
|---|---|
| Sponge with Velcro, coarse | 49300 |
| Sponge with Velcro, fine | 49400 |
| Sponge on supporting backing with Velcro, coarse | 48300 |
| Sponge on supporting backing with Velcro, fine | 48400 |
- Sponge disc for traditional finish plaster such as multi finish.
- Sponges on supporting plates can be worked off completely.
Ø 350 mm Sponge discs superfine
| Description | No. |
|---|---|
| Sponge with Velcro, superfine | 49500 |
| Sponge on supporting plate with Velcro, superfine | 48500 |
- For generating a fine surface structure.
- Sponges on supporting plates can be worked off completely.
Ø 350 mm LEMON Hydro sponge ring
| Description | No. |
|---|---|
| LEMON Hydro sponge ring with Velcro | 48810 |
- NEW! For a perfect surface structure!
Ø 350 mm STRUCTURA Hydro sponge ring
| Description | No. |
|---|---|
| STRUCTURA Hydro sponge ring with Velcro | 48800 |
- For a perfect surface structure!
Ø 350 mm Sponge discs blue
| Description | No. |
|---|---|
| Sponge with Velcro, blue | 49800 |
- For fine plastering (very fine grain).
Ø 350 mm Sponge discs brown
| Description | No. |
|---|---|
| Sponge with Velcro, brown | 49900 |
- For fine plastering (very fine grain).
Ø 350 mm Felt disc
| Description | No. |
|---|---|
| Felt Disc with Velcro | 49600 |
- Rubbing interior / exterior lime-cement render surfaces.
Ø 350 mm Smoothing disc
| Description | No. |
|---|---|
| Smoothing disc with Velcro | 34550 |
- For abrading render and plaster after setting.
Ø 250 mm Sponge discs
| Description | No. |
|---|---|
| Sponge disc, coarse | 33000 |
| Spare sponge, coarse | 33100 |
| Sponge disc, fine | 33400 |
| Spare sponge, fine | 33500 |
- For sponging plaster and lime-cement render.
- For generating a fine surface structure.
- Sponging filler compounds and clay plaster.
Ø 450 mm Trowel
| Description | No. |
|---|---|
| Patented Trowel | 34300 |
- NEW! Finishing wall renders of all types.
| Description | No. |
|---|---|
| Premium package gypsum multi finish: Sponge on plastic board, trowel, supporting plate and polishing pad | 34305 |
Shoulder strap
| Description | No. |
|---|---|
| Shoulder strap | 05100 |
- With shoulder pad and length adjustment.
By loading the video, you agree to YouTube's privacy policy.
Learn more
1) Rounded total weight without accessories
Plaster Finishing Machines comparison
 PFM 5 |
 PFM |
 PFM W |
 PFM WT |
 PFM C |
PFM CX |
|
|---|---|---|---|---|---|---|
| Power consumption | 1 000 W | 1 000 W | 1 000 W | 600 W | 18 V / 5,2 Ah (Li-Ion) optional 18 V / 8,0 Ah (LiHD) | 18 V / 5,2 Ah (Li-Ion) optional 18 V / 8,0 Ah (LiHD) |
| Idle engine speed rpm | 75-340 | 75-340 | 75-340 | 75-340 | 230 | |
| Weight hand tool kg | approx. 3,4 | approx. 1,3 | approx. 2,0 | approx. 1,7 | approx. 2,8 | |
| Accessory Ø | 250 / 350 | 250 / 350 | 250 / 350 | 350 | 250 / 350 | |
| Container | 6 l | |||||
| Plaster finishing | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ | |
| Flattening fresh concrete | ♦♦ | ♦♦ | ♦♦ | ♦♦ | ♦♦ | |
| Working on scaffolding | ♦♦♦ | ♦ | ♦ | ♦♦ | ♦♦♦ |
Suitability levels: suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Always stay up to date with
our Newsletter