- Milling of hard joints
- Cutting of cable slots
- Low vibration
- Almost dust-free renovation of joints
(fine dust / particulates only 0.25 mg/m³)
- Fatigue-free operation due to light weight hand tool (approx. 1.7 kg)
- Motor separated from cutting device -> longer motor life
- Robust aluminum housing
The joint cutter Piranha Cutter is the right choice for the renovation of hard joints.
The 1 500 W motor and the up to 9 100 min-1 of the diamond cutting discs provide plenty of traction - whereas machines from other manufacturers sorely lack the power. Successfull joint renovation (e.g. of clinker facades or swimming pool tiles) or cable slot cutting is guaranteed - without exertion.
The robust aluminum housing has been carefully designed to ensure an almost dust-free milling process. The Piranha Cutter is recommended by the European Federation of Building and Wood Workers for low dust generation during work.
The sophisticated handhold of the joint cutter provides significant additional value. Firstly, it allows a good view upon the working area. Secondly, the built-in anti-vibration buffer makes work much more pleasant compared to conventional joint milling machines.
Another factor that contributes to working comfort is the separation of motor and hand tool. The motor can be carried on a belt or shoulder strap, which not only makes the machine very light weight (hand tool 1.7 kg), but also increases the service life of the motor.
Fields of application
- Renovation of joints ♦ ♦ ♦
suited ♦ / well suited ♦♦ / very well suited ♦♦♦
|Power consumption||1 500 W|
|Idle engine speed||2 600-9 100 rpm|
|Net weight hand tool||1.7 kg|
|Total weight1)||5.8 kg|
Scope of supply
|Diamond cutting disc - set (Item no. 90120)|
Diamond cutting wheels
|Diamond cutting disc set Ø 115 mm (3 pcs.)
(use with distance disc No. 18440)
|Diamond cutting disc set Ø 125 mm (3 pcs.)
(use with distance disc No. 18441)
- 115 mm disc= 30 mm milling depth
- 125 mm disc = 35 mm milling depth
D 115 - 3 blades= 9 mm milling width
D 115 - 2 blades= 5,5 mm milling width
D 115 - 1 blade= 2,2 mm milling width
D 125 - 3 blades= 8,5 mm milling width
D 125 - 2 blades= 5,4 mm milling width
D 125 - 1 blade= 2,4 mm milling width
- With shoulder pad and length adjustment.
1) Rounded total weight without accessories
PIRANHA in comparison
|Motor output||1.500 W||1.500 W|
|Tool r.p.m.||2.600 - 9.100||6.500 - 23.300|
|Weight in kg||approx. 1,6 kg (tool)||approx. 1,8 kg (tool)|
|Plaster and concrete machining||♦♦|
Suitability levels: suited ♦ / well suited ♦♦ / very well suited ♦♦♦