Plaster finishing machine with water tank
PFM WT
Item no. 70000
Applications
- Machining plaster, lime-cement render and clay plaster
- Abrading render and plaster
- Gypsum multi finish
- Machining of fine finish plaster
- Smoothing concrete elements
- Sponging filler compounds
Advantages
- Built-in backpack water tank (6 l)
- Uniform structure due to large operation area
- Time- and cost-saving (approx. 50 % time saving compared to manual work)
- Adjustable water injection by lever valve
- Light weight hand tool
Specifications
Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions.
Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required.
The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications.
Due to the large operation area of up to Ø 350 mm (trowel even Ø 450 mm), your work can be completed much faster and easier than by hand.
The PFM WT was formerly knows as ROKAMAT NAUTILO.
Since March 2023 the handpiece of the PFM WT is even lighter, as the machine is supplied without hood and handle. Optionally the PFM WT can still be ordered with a handle.
Fields of application
- Plaster finishing ♦ ♦ ♦
- Flattening fresh concrete ♦ ♦
- Working on scaffolding ♦ ♦ ♦
suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Technical data
| Power consumption | 600 W |
| Idle engine speed | 75-340 rpm |
| Volume water tank | 6 l |
| Net weight hand tool | 1,7 kg |
| Net weight backpack | 5,7 kg |
| Total weight1) | 9,4 kg |
| Accessory-Ø | 250/350 mm |
Scope of supply
| Plaster finishing machine (water injection) |
| Strap |
| Base plate with Velcro |
| Sponge disc Ø 350 mm (Item no. 49300) |
| Case |
Base plate with Velcro Ø 350 mm
Velcro system for Ø 350 mm
| Description | Item no. |
|---|---|
| Base plate with Velcro | 48000 |
Rubbing plates Ø 350 mm
| Description | Item no. |
|---|---|
| Rubbing plate with Velcro, perforated | 48100 |
| Rubbing plate with Velcro, smooth | 48200 |
- For smoothing mortar.
- Smooth plate also for fine finish plaster.
Sponge discs Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, coarse | 49300 |
| Sponge with Velcro, fine | 49400 |
| Sponge on supporting backing with Velcro, coarse | 48300 |
| Sponge on supporting backing with Velcro, fine | 48400 |
- Sponge disc for traditional finish plaster such as multi finish.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
Sponge discs superfine Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, superfine | 49500 |
| Sponge on supporting plate with Velcro, superfine | 48500 |
- For generating a fine surface structure.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
LEMON Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| LEMON Hydro sponge ring on supporting plate with Velcro | 48810 |
- For a perfect surface structure!
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
STRUCTURA Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| STRUCTURA Hydro sponge ring on supporting plate with Velcro | 48800 |
- Fine-pored, absorbent sponge for finishing fine plaster.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely
Sponge disc blue Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, blue | 49800 |
- For fine plastering (very fine grain).
Sponge disc brown Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, brown | 49900 |
- For fine plastering (very fine grain).
Felt disc Ø 350 mm
| Description | Item no. |
|---|---|
| Felt disc with Velcro | 49600 |
- Rubbing interior / exterior lime-cement render surfaces.
Smoothing disc Ø 350 mm
| Description | Item no. |
|---|---|
| Smoothing disc with Velcro | 34550 |
- For abrading render and plaster after setting.
Trowel Ø 450 mm
| Description | Item no. |
|---|---|
| Patented Trowel | 34300 |
- Finishing wall renders of all types.
| Description | Item no. |
|---|---|
| Premium package gypsum multi finish: Sponge on plastic board, trowel, supporting plate and polishing pad | 34305 |
By loading the video, you agree to YouTube's privacy policy.
Learn more
1) Rounded total weight without accessories
Plaster Finishing Machines comparison
 PFM 5 |
 PFM |
 PFM W |
 PFM WT |
 PFM CX |
|
|---|---|---|---|---|---|
| Power consumption | 1 000 W | 1 000 W | 1 000 W | 600 W | 18 V / 5,2 Ah (Li-Ion) optional 18 V / 8,0 Ah (LiHD) |
| Idle engine speed rpm | 75-340 | 75-340 | 75-340 | 75-340 | 65-250 |
| Weight hand tool kg | approx. 3,4 | approx. 1,3 | approx. 2,0 | approx. 1,7 | approx. 2,7 |
| Accessory Ø | 250 / 350 | 250 / 350 | 250 / 350 | 350 | 250 / 350 |
| Container | 6 l | ||||
| Plaster finishing | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ |
| Flattening fresh concrete | ♦♦ | ♦♦ | ♦♦ | ♦♦ | ♦♦ |
| Working on scaffolding | ♦♦♦ | ♦ | ♦ | ♦♦ | ♦♦♦ |
Suitability levels: suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Always stay up to date with
our Newsletter