Plaster finishing machine
PFM
Item no. 30000
Applications
- Machining plaster, lime-cement render and clay plaster
- Abrading render and plaster
- Gypsum multi finish
- Machining of fine finish plaster
- Smoothing concrete elements
- Sponging filler compounds
Advantages
- Light weight
- Uniform structure due to large operation area
- Time- and cost-saving (approx. 50 % time saving compared to manual work)
- Continuous speed control (optimal adjustment to each application)
Specifications
The plaster finishing machine for purists - without any frills whatsoever. That makes the PFM the lightest plaster finishing machine in our portfolio (hand tool only 1,3 kg). This is ensured by the well-established and reliable Rokamat concept: the separation of hand tool and motor (the latter is worn on a belt or shoulder strap). In addition to reducing weight, this feature also largely protects the motor from soiling.
What once had to be done laboriously by hand can now easily be done by machine. Select any speed between 75-340 min-1, thus adapting it to fit your requirements.
The PFM is not just suited for plaster finishing. Thanks to a wide scope of accessories it is also ideal for smoothing of concrete elements and gypsum multi finish.
The special connection tube allows for an unobstructed view on the working surface and makes it possible to reach higher areas, too.
Whether it is plaster, lime-cement render, clay plaster, synthetic resin plaster, mineral plaster or silicate plaster - the PFM is just itching to get to work!
The PFM was formerly knows as ROKAMAT DRY.
Fields of application
- Plaster finishing ♦ ♦ ♦
- Flattening fresh concrete ♦ ♦
- Working on scaffolding ♦ ♦ ♦
suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Technical data
| Power consumption | 1 000 W |
| Idle engine speed | 75-340 rpm |
| Net weight hand tool | 1,3 kg |
| Total weight1) | 4,9 kg |
| Accessory-Ø | 250/350 mm |
Scope of supply
| Plaster finishing machine |
| Strap |
| Base plate (Velcro system) |
| Sponge disc Ø 350 mm (Item no. 49300) |
| Case |
Base plate with Velcro Ø 350 mm
Velcro system for Ø 350 mm
| Description | Item no. |
|---|---|
| Base plate with Velcro | 48000 |
Rubbing plates Ø 350 mm
| Description | Item no. |
|---|---|
| Rubbing plate with Velcro, perforated | 48100 |
| Rubbing plate with Velcro, smooth | 48200 |
- For smoothing mortar.
- Smooth plate also for fine finish plaster.
Sponge discs Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, coarse | 49300 |
| Sponge with Velcro, fine | 49400 |
| Sponge on supporting plate with Velcro, coarse | 48300 |
| Sponge on supporting plate with Velcro, fine | 48400 |
- Sponge disc for traditional finish plaster such as multi finish.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
Sponge discs superfine Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, superfine | 49500 |
| Sponge on supporting plate with Velcro, superfine | 48500 |
- For generating a fine surface structure.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
LEMON Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| LEMON Hydro sponge ring on supporting plate with Velcro | 48810 |
- For a perfect surface structure!
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
STRUCTURA Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| STRUCTURA Hydro sponge ring on supporting plate with Velcro | 48800 |
- Fine-pored, absorbent sponge for finishing fine plaster.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
Sponge disc blue Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, blue | 49800 |
- For fine plastering (very fine grain).
Sponge disc brown Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, brown | 49900 |
- For fine plastering (very fine grain).
Felt disc Ø 350 mm
| Description | Item no. |
|---|---|
| Felt disc with Velcro | 49600 |
- Rubbing interior / exterior lime-cement render surfaces.
Smoothing disc Ø 350 mm
| Description | Item no. |
|---|---|
| Smoothing disc with Velcro | 34550 |
- For abrading render and plaster after setting.
Sponge discs Ø 250 mm
| Description | Item no. |
|---|---|
| Sponge disc, coarse | 33000 |
| Spare sponge, coarse | 33100 |
| Sponge disc, fine | 33400 |
| Spare sponge, fine | 33500 |
- For sponging plaster and lime-cement render.
- For generating a fine surface structure.
- Sponging filler compounds and clay plaster.
- NOTE: These sponge discs can be screwed directly onto the tool holder without a base plate.
Trowels for smoothing concrete Ø 250/350 mm
| Description | Item no. |
|---|---|
| Trowel with Velcro, smooth (stainless steel) -longlife- Ø 350 mm | 48900 |
| Trowel with Velcro, smooth (stainless steel) -longlife- Ø 215 mm | 34900 |
| Base plate (to use with trowel Ø 215 mm) | 69110 |
- Smoothing concrete elements.
Trowel Ø 450 mm
| Description | Item no. |
|---|---|
| Patented Trowel | 34300 |
- Finishing wall renders of all types.
| Description | Item no. |
|---|---|
| Premium package gypsum multi finish: Sponge on plastic board, trowel, backing pad and polishing pad | 34305 |
Shoulder strap
| Description | Item no. |
|---|---|
| Shoulder strap | 05100 |
- With shoulder pad and length adjustment.
By loading the video, you agree to YouTube's privacy policy.
Learn more
By loading the video, you agree to YouTube's privacy policy.
Learn more
By loading the video, you agree to YouTube's privacy policy.
Learn more
1) Rounded total weight without accessories
Plaster Finishing Machines comparison
 PFM 5 |
 PFM |
 PFM W |
 PFM WT |
 PFM CX |
|
|---|---|---|---|---|---|
| Power consumption | 1 000 W | 1 000 W | 1 000 W | 600 W | 18 V / 5,2 Ah (Li-Ion) optional 18 V / 8,0 Ah (LiHD) |
| Idle engine speed rpm | 75-340 | 75-340 | 75-340 | 75-340 | 65-250 |
| Weight hand tool kg | approx. 3,4 | approx. 1,3 | approx. 2,0 | approx. 1,7 | approx. 2,7 |
| Accessory Ø | 250 / 350 | 250 / 350 | 250 / 350 | 350 | 250 / 350 |
| Container | 6 l | ||||
| Plaster finishing | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ |
| Flattening fresh concrete | ♦♦ | ♦♦ | ♦♦ | ♦♦ | ♦♦ |
| Working on scaffolding | ♦♦♦ | ♦ | ♦ | ♦♦ | ♦♦♦ |
Suitability levels: suited ♦ / well suited ♦♦ / very well suited ♦♦♦