Cordless plaster finishing machine
PFM CX
Item no. 36000
Applications
- Machining plaster, lime-cement render and clay plaster
- Abrading render and plaster
- Machining of fine finish plaster
- Sponging filler compounds
- Smoothing concrete elements
Advantages
- Speed control (optimal adjustment to each application)
- Freedom of movement - no cumbersome cable
- Brushless motor
- Approx. 50 % time saving compared to manual work
- Uniform structure due to large support surface (Ø 350 mm)
- Powerful Li-Ion or LiHD battery
- ROKAMAT is member of the Cordless Alliance System (CAS)1): One battery, many solutions
Specifications
Compared to the PFM C, the battery motor of the PFM CX plastering machine is brushless and has speed control. In addition to saving weight, this also enables even more flexibility in applications.
The machine is powered by high-quality Li-Ion/LiHD battery packs that are compatible with the Cordless Alliance Systems (CAS)1) - the world's most powerful rechargeable battery system.
The PFM CX is more than just a cordless plaster finishing machine. By using the respective accessories, it is also suitable, for example, for smoothing mortar and concrete elements or for abrading render and plaster after setting.
Thanks to the special hand hold, you always have a good view on the operating surfaces and can easily reach higher areas.
Once the battery is charged and the accessory disc is mounted, you can start immediately. Straight from the case - no further preparations are necessary.
Fields of application
- Plaster finishing ♦ ♦ ♦
- Flattening fresh concrete ♦ ♦
- Working on scaffolding ♦ ♦ ♦
suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Technical data
| Battery voltage/capacity | 18 V / 5.2 Ah (Li-Ion) |
| Idle engine speed | 65-250 |
| Total weight2) | approx. 2.7 kg |
| Accessory-Ø | 350 mm |
Scope of supply
| Cordless plaster finishing machine PFM CX |
| 2x Battery packs 18 V / 5.2 Ah |
| Battery charger ASC 55 |
| Base plate with Velcro |
| Sponge disc Ø 350 mm (Item no. 49300) |
| Case |
Battery scope of delivery: 2x Battery packs 18 V / 5.2 Ah1)
| Item no. | |
| 36000-a |
Battery scope of delivery: Without Battery packs and Battery charger
| Item no. | |
| 36000-b |
Battery scope of delivery: 2x Battery packs 18 V / 10.0 Ah1) 3)
| Item no. | |
| 36000-i |
Supporting plate with Velcro Ø 350 mm
Velcro system for Ø 350 mm
| Description | Item no. |
|---|---|
| Supporting plate with Velcro | 48000 |
Rubbing plates Ø 350 mm
| Description | Item no. |
|---|---|
| Rubbing plate with Velcro, perforated | 48100 |
| Rubbing plate with Velcro, smooth | 48200 |
- For smoothing mortar.
- Smooth plate also for fine finish flaster.
Sponge discs Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, coarse | 49300 |
| Sponge with Velcro, fine | 49400 |
| Sponge on supporting plate with Velcro, coarse | 48300 |
| Sponge on supporting plate with Velcro, fine | 48400 |
- Sponge disc for traditional finish plaster such as multi finish.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
Sponge discs superfine Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, superfine | 49500 |
| Sponge on supporting plate with Velcro, superfine | 48500 |
- For generating a fine surface structure.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
LEMON Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| LEMON Hydro sponge ring on supporting plate with Velcro | 48810 |
- For a perfect surface structure!
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
STRUCTURA Hydro sponge ring Ø 350 mm
| Description | Item no. |
|---|---|
| STRUCTURA Hydro sponge ring on supporting plate with Velcro | 48800 |
- Fine-pored, absorbent sponge for finishing fine plaster.
- NOTE: “Sponge on supporting plate” refers to a sponge that is glued over its entire surface to a plastic supporting plate. The supporting plate can be attached to the “Base plate with Velcro” (Item no. 48000), just like a normal sponge disc. Advantage: the sponge is more stable and can be used up completely.
Sponge disc blue Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, blue | 49800 |
- For fine plastering (very fine grain).
Sponge disc brown Ø 350 mm
| Description | Item no. |
|---|---|
| Sponge with Velcro, brown | 49900 |
- For fine plastering (very fine grain).
Felt disc Ø 350 mm
| Description | Item no. |
|---|---|
| Felt disc with Velcro | 49600 |
- Rubbing interior / exterior lime-cement render surfaces.
Sponge discs Ø 250 mm
| Description | Item no. |
|---|---|
| Sponge disc, coarse | 33000 |
| Spare sponge, coarse | 33100 |
| Sponge disc, fine | 33400 |
| Spare sponge, fine | 33500 |
- For sponging plaster and lime-cement render.
- For generating a fine surface structure.
- Sponging filler compounds and clay plaster.
- NOTE: These sponge discs can be screwed directly onto the tool holder without a base plate.
Trowels for smoothing concrete Ø 250/350 mm
| Description | Item no. |
|---|---|
| Trowel with velcro, smooth (stainless steel) -longlife- Ø 350 mm | 48900 |
| Trowel with velcro, smooth (stainless steel) -longlife- Ø 215 mm | 34900 |
| Base plate (to use with trowel Ø 215 mm) | 69110 |
- Smoothing concrete elements.
Smoothing disc Ø 350 mm
| Description | Item no. |
|---|---|
| Smoothing disc with Velcro | 34550 |
- For abrading render and plaster after setting.
CAS Battery pack + battery charger
| Description | Item no. |
|---|---|
| Battery pack 18 V / 5.2 Ah | 08050 |
| Battery pack 18 V / 10.0 Ah3) | 08052 |
| Battery charger standard ASC 55 | 08060 |
| Fast battery charger ASC 145 | 08065 |
| Premium package battery: Fast battery charger + 1 battery pack 18 V / 5.2 Ah | 08066 |
| Premium package battery: Fast battery charger + 1 battery pack 18 V / 10.0 Ah3) | 08068 |
CORDLESS ALLIANCE SYSTEM: One battery, many solutions.
ROKAMAT is Cordless Alliance System (CAS) partner. The battery packs are additionally compatible with cordless power tools from other well-known machine manufacturers. Further informations on https://www.cordless-alliance-system.com.
2) Rounded total weight without batteries and accessories.
3) Delivery restrictions: no air and sea freight possible. Please check with us beforehand if shipment to your country is possible.
Plaster Finishing Machines comparison
PFM 5 |
PFM |
PFM W |
PFM WT |
PFM CX |
|
|---|---|---|---|---|---|
| Power consumption | 1 000 W | 1 000 W | 1 000 W | 600 W | 18 V / 5,2 Ah (Li-Ion) optional 18 V / 8,0 Ah (LiHD) |
| Idle engine speed rpm | 75-340 | 75-340 | 75-340 | 75-340 | 65-250 |
| Weight hand tool kg | approx. 3,4 | approx. 1,3 | approx. 2,0 | approx. 1,7 | approx. 2,7 |
| Accessory Ø | 250 / 350 | 250 / 350 | 250 / 350 | 350 | 250 / 350 |
| Container | 6 l | ||||
| Plaster finishing | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ | ♦♦♦ |
| Flattening fresh concrete | ♦♦ | ♦♦ | ♦♦ | ♦♦ | ♦♦ |
| Working on scaffolding | ♦♦♦ | ♦ | ♦ | ♦♦ | ♦♦♦ |
Suitability levels: suited ♦ / well suited ♦♦ / very well suited ♦♦♦
Bleiben Sie Immer auf dem neuesten Stand mit unserem Newsletter




